Comprehensive High Resolution SVHS Plenum Cable

Last Minute Sales & Specials

CH1137: Ships Via Small Parcel Ground
Comprehensive's SVHS/HRP is a very hard to find high resolution SVHS cable with a CL-2P rated plenum jacket for installation use. When you're unable to run SVHS cable through conduit in walls and ceilings, plenum jacketed cable is necessary to meet fire prevention requirements.

CVC-SVHS/HRP is constructed of two 26 awg stranded tinned copper conductors with a 100pct tinned copper wrap shield for maximum SVHS performance. Our premium construction also helps minimize signal delay inherent to SVHS signals over long runs. Sequential foot markings make cable management quick and easy. Use Comprehensive's S4P/G premium high resolution 4 pin or BP-RGB BNC connectors to terminate.

Features:

High resolution, low loss construction
95pct-100pct tinned copper braided shield
Sequential foot markings
X-traflex jacket
UL approved

Specifications:

Quantity: 2
Center Conductor: 2 x 26 awg stranded tinned copper
Shield: 100pct OFC tinned copper wrap w/aluminum foil wrap
Impedance: 75 ohm
Capacitance per ft.: 16
Insulation: Fluoropolymer
Velocity of Propagation: 83pct
Color code: white and yellow
Attenuation: (10 MHz: 2.3 db/100 ft.); (50 MHz: 5.9 db/100 ft.); (100 MHz: 5.5 db/100 ft.); (200 MHz: 8.0 db/100 ft.); (400 MHz: 12.0 db/100 ft.); (1000 MHz: 21.0db/100 ft.)
Outer jacket: Plenum
Final diameter: 0.240''
Color: black
UL listing: UL/CL2P, CSA/CMP
Bulk lengths: 500 and 1000 ft.